Understanding In-Cab Detections

In-cab detection covers all of the behaviors, conditions, and device inputs that your cameras and devices are able to detect and report to LytxOne. Detections include unsafe driving behaviors, incidents, driver-initiated triggers, and device or power events. This article summarizes every supported detection and all of the configurations available for them.

Supported Detections

Note
Distracted driving, Phone usage and Tailgating events require at least 10Mph speed to be triggered.

Note
There is a 15-second interval between triggers of the same event type.

Note
Initial release features are available upon request.

Where Detections Are Configured

Detections are configured on the Safety settings page at the fleet level, and per vehicle from the Safety tab in Asset Configuration. Each detection appears as a collapsible row with an on/off status dot and a plain-language summary of its current configuration. Rows are grouped by subject and can be filtered by:

• All – Every supported detection.
• Recording – Detections that record media to the cloud.
• Driver alert only – Detections that trigger an in-cab alert without recording to the cloud.
• Off – Detections that are currently disabled.

Recording to the cloud and the in-cab driver alert are separate controls. Turning off the in-cab alert for a detection does not disable the detection itself, and cloud recording continues as configured.

Events configurations

• In Cabin Alert  - Enable or disable the event in cabin alert, either at the fleet level or per vehicle.

• Action - Defines the media type generated when an event is triggered:

  • Video – Records a 30-second video clip.

  • Snapshot – Captures a single still image.

  • Notify – No media; the event is logged without any visual content.

  

  Note
  For video events, a snapshot is captured first so immediate media is available. In areas with poor cellular coverage*, the system will try to upload the video up to three times. If it fails, only the snapshot will appear in the event. Full video can be retrieved from the Recordings section.

• Trigger Notification - Controls when a cabin alert is activated after a safety event:

  • Disabled – No alert is triggered.

  • Immediately – Alert triggers as soon as the event occurs.

  • Allow Correction – Delays alert to give the driver time to self-correct.

• Vehicle Type - Adjusts device behavior to match the vehicle’s size:

  • Light Duty – For passenger vehicles and small commercial cars used in everyday driving.

  • Medium Duty – For mid-sized vehicles like vans and light trucks that carry moderate loads and operate in varied conditions.

  • Heavy Duty – For large trucks and equipment that are used for long hours, heavy loads, or more demanding routes.

• Sensitivity - Controls how easily the event is triggered:

  • Low – Fewer detections, reduces false positives.

  • Medium – Balanced detection level.

  • High – Detects more events, including subtle behaviors.

• Additional Configurations - Advanced options specific to the event.

  • Tailgating
    • Speed Threshold (mph) – The vehicle speed that must be exceeded to trigger an alert.
    • Duration Threshold (seconds) – The minimum time the vehicle must tailgate before an alert is triggered.

  • Absolute Speed

    • Speed Threshold (mph) – The vehicle speed that must be exceeded to trigger an alert.

    • Duration Threshold (seconds) – The amount of time the vehicle must remain above the speed threshold before the alert is triggered. 

    • Repeat Interval (seconds) – How often the driver receives an in-cabin alert while continuously exceeding the speed threshold. 

  • Posted Speed

    • Speed Threshold (mph or % over limit) – The amount above the posted speed limit that must be exceeded to trigger an alert. Fleet managers can choose whether to set this threshold in miles per hour or as a percentage over the posted limit.

    • Duration Threshold (seconds) – The amount of time the vehicle must remain over the posted speed threshold before the alert is triggered.

    • Repeat Interval (seconds) – How often the driver receives an in-cabin alert while continuously exceeding the posted speed threshold.

  • Harsh Braking / Harsh Acceleration / Harsh Turning

    • Sensitivity (G-Force Threshold) – Configure the G-force value that determines when an accelerometer event is triggered. Lower thresholds increase sensitivity and capture more events, while higher thresholds reduce noise by triggering only on stronger impacts or maneuvers.

	In-Cabin Alert	Media	Trigger Notification	Sensitivity	Vehicle Type	Additional Configurations
Harsh Braking
Harsh Acceleration
Harsh Turning
Tailgating
Absolute Speed
Posted Speed
Distracted Driver
Phone Usage
Seatbelt
Smoking
Drinking Or Eating
Fatigue
Rolling Stop Sign
Red Light
Pedestrian
Near Collision
Collision
Cabin Camera Tamper
Cabin Camera Obstruction
Front-Facing Camera Tamper
Driver Button
Power Disconnect
Digital In 1
Digital In 3

What is the difference between "Tone" and "Coaching Alert"?

The Tone is a simple auditory notification, typically a beep, designed to alert the driver to a safety event without providing further context.

In contrast, Coaching Alerts are verbal notifications that provide specific guidance to help the driver understand and correct their behavior. These alerts are instructional and tailored to the event, offering actionable feedback.

For a detailed list of coaching alerts associated with each event type, read Supported Safety Events Table.

* Subject to available cellular network connectivity.