The LED indicators on the RZ1 Vehicle Hub and Camera provide crucial information about the system's power, connectivity, and operational state. Below is a guide to understanding what each LED status means for the hub and camera.
RZ1 Vehicle Hub’s LED’s
POWER LED
- Green: The hub is connected to power and is in either an active or standby state.
GNSS LED (GPS Status)
- Off: The hub is in standby mode, and the GNSS and CELL LEDs are inactive.
- Red: The GNSS is active but has not acquired any satellites.
- Blinking Red: The hub is attempting to acquire satellites but has not yet achieved a location fix.
- Green: The GNSS has successfully acquired satellites and a location fix.
CELL LED (Network Connectivity)
- Off: The hub is in standby mode, with no active network connection (GNSS LED is also off).
- Red: No SIM card is detected in the hub.
- Blinking Red: The hub is attempting to connect to a mobile network.
- Blinking Green: The hub is connected to the mobile network but not yet to the Roadeazy cloud.
- Green: The hub is fully connected to both the mobile network and the Roadeazy cloud.
RZ1 Camera System LED’s
Power LED (Green)
- On: The camera is powered and in an active state.
- Off: The camera is in standby mode or powered off.
Event LED (Red)
- Blinking: A visual event alert is active, indicating that the camera has detected and recorded an event.