Alert & Rule Types – LytxOne

Alerts and rules can be configured to monitor specific behaviors or conditions across your fleet. Each type has its own configuration options to help you tailor notifications and automated actions to your needs. Below is a list of currently supported alert and rule types and their available settings.

Note
For setup instructions, see How to Add or Edit an Alert or How to Add or Edit a Rule.

Available Alert Types

Alert Type	Description	Configurable Options
Safety	Triggers an alert when a driver performs a risky behavior detected by the RZ1 device.	Select one or more safety events - View full list of supported safety events.
Geofence	Triggers an alert when an asset enters or exits a designated geofence.	Configure the geofences you want to monitor for entry or exit events.
Fault Codes	Triggers an alert when a fault code or check engine light is detected by the RZ1 device.	Toggle alert on any fault code and/or alert on check engine light.
Health	Triggers an alert when a device health status changes.	-
Idling	Triggers an alert when a vehicle transitions into an idling state.	-
Movement	Triggers an alert based on the vehicle’s movement state (Stopped or Moving) and a defined duration.	Set movement duration threshold (in minutes).

Available Rule Types

Alert Type	Description	Configurable Options
Geofence - Rule	Triggers an action when a vehicle enters a defined geofence. Recording and AI events are automatically disabled on every camera while the rule is active, and restored once the vehicle exits the geofence.	Select the geofence(s) and configure the trigger as entry or exit. Multiple geofences can be added to the same rule.
Timebase - Rule	Triggers an action during configured days and hours. Recording and AI events are automatically disabled on every camera during the active window, and restored once the time window ends.	Select the active days, define the start and end time, and set the timezone.